Tel: 01884 33559  Web www.woodwarm.co.uk  Contact By Email

The Woodwarm Inset range of multifuel stoves is designed for use specifically where the site and hearth demand a slimmer projection onto the hearth.  Effectively there are 3 separate models. 

The Fireview 4 Kw Low Profile is the smallest projection onto the hearth and is designed to fit the standard builder's opening (22" x 16") (560mm x 406mm) with the fire lump in place.  Normally this appliance will discharge its flue gases directly into the existing chimney and only a seal between the rear box and the fire lump or chest is required, making this an extremely attractive installation option.

The Woodwarm 6.5 Kw Low Profile Easy Inset, whilst the front is identical  to the 4 Kw version, the rear box is designed to fit the standard builders opening, but with the lump removed.  This appliance can either be flued vertically through a letter box type flue outlet and parged into the chest with insulation on the sides and rear of the fire box.  The fire box is a double skinned convection chamber allowing the appliance to convect as well as radiate its heat into the room. 

The Enigma 3.5 Kw Easy Inset is designed to fit the standard builder's opening (22" x 16") (560mm x 406mm) with the fire lump in place.  Normally this appliance will discharge its flue gases directly into the existing chimney and only a seal between the rear box and the fire lump or chest is required, making this an extremely attractive installation option.