Tel: 01884 33559  Web www.woodwarm.co.uk  Contact By Email

BM Valve as Fitted (Standard)

BM Valve as Fitted with Tempomat

To Fit & Calibrate
The Tempomat

1. First Remove the Valve Dust cover 4 small screws, Remove in this plate the small press out to reveal the calibration screw on the Valve.
   
2. Fit the tempomat using 3 of the valve dust cover screws, adjust the calibration screw so that when the tickle knob is pressed the travel is in line with the tempomat actuation lever.
   
3. Note there is a manual over ride selection on the tempomat--ensure this is in released position for automatic operation, and tripped to inactivate the unit.
   

Checking Thermostat demand Setting and Lighting The appliance.

1. Make Sure that the electricity supply is turned on.
   
2. Turn the oil control valve to high fire position.
   
3. Turn on the Oil Supply at the isolation valve, and allow a flow of oil to establish.
   
4. Ensure the CM67 Room stat is set for demand, and the LED is indicating Demand.
   
5. Manual Ignition:- Allow 5 to 10 minutes for the oil to prime the burner:-  Light the appliance through the lighting port
   
6. Electronic Ignition:- Press the ignition button.
   
7. After a short while turn the appliance to the desired heat output.